When the power, hot water and steam lights are on, you can start brewing coffee.

1. When the knob is in standby mode, the three lights are not always on (the coffee preheating temperature has not been reached). When the knob is turned to the coffee brewing position, the boiler will stop heating, the water pump will not work, and the hot water and steam lights will flash quickly. At this point, the knob should turn to standby mode, the power light is always on, and the double lights are flashing.

2. In standby mode, turn the coffee brewing knob. At this time, the water pump starts to work for 2 seconds, then stops for 2 seconds, and continues to work for 60 seconds to automatically shut down. (After 1 minute of brewing, the pump will automatically stop.) Afterwards, turn the knob to the standby position to restart heating. Three lights were still on.

3. When the knob is in the standby position, turn the knob to the hot water/steam position, the boiler stops heating, the water pump does not work, the hot water and steam indicators will flash quickly, at this time, you need to turn the knob to the standby position. The power light is always on, and the two lights flash quickly.

notes:

When you need to pause or stop coffee brewing, just turn the knob from brewing position back to standby mode.

Hot water function:

While the power, hot water and steam lights are still on, press the hot water button. At this time, the power/hot water indicator is always on, the steam indicator is off, and the hot water function is ready.

1. In hot water mode, turn the knob to the hot water/steam position. At this time, the machine starts to make hot water. When finished, turn the knob back to the standby position and don't forget to press the hot water button on the control panel again to exit the hot water mode. The power/hot water light is on solid and the steam light is off.

2. In hot water mode, turn the knob to the coffee brewing position. At this time, the hot water indicator light will flash quickly, the boiler will stop heating, and the water pump will stop working. At this point, you need to turn the knob back to standby mode. The power light is always on, the hot water light is flashing, and the steam is off.

notes:

When you need to pause or stop hot water, simply turn the knob from the hot water/steam position back to the standby position.

Steam function (for milk texture)

When the power, hot water, and steam indicators are always on, press the steam button, the power indicator is always on, the hot water indicator is off, the steam indicator is always on, and you can start milking.

1. In steam mode, turn the knob to the hot water/steam position. At this time, the machine starts to generate steam. When done, turn the knob back to standby. And don't forget to press the steam button on the control panel again to exit steam mode. The power light is always on, the steam light is always on, and the hot water light is off.

2. In steam mode, turn the knob to coffee brewing. At this time, the soda indicator light of the machine will flash quickly, the boiler will stop heating, and the water pump will stop working. At this point, you need to turn the knob back to standby mode. The power light is on solid, the steam light is blinking, and the hot water light is off.

Click here for more product details